This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Railquip introduces a hydraulically operated bogie lift and transfer table for truck removal and installation. It is equipped with a floating platform, which is manually moveable to each direction. Movement in longitudinal direction is plus/minus 1 inch; movement in transverse direction is plus/minus 1-1/8-inch. One side of the platform is open. The width is 31 inches and depth is 78.7 inches. The lifting table is equipped with an electric drive motor on one axle. Driving speed maximum is 2 mph. The unit is operated from a handheld control with forward and reverse movement, as well as emergency stop switch functions. The power supply is available through an installed cable drum with 82 feet of cable. The lifting and lowering of the platform is done hydraulically. Platform size is 118 inches by 74.8 inches; fully raised, the height of the platform is 69 inches; the retracted height of the platform is 29.3 inches. The scissor lift and transfer table is equipped with lifting pockets for transport by a forklift truck.